MASCO Catalog: Concrete Forming & Accessories

113 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T FORM TREATMENT FORM RELEASE Mascokote Premium Mascokote GP Description : A reactive form release with a mineral carrier that leaves an architectural or high visual impact concrete surface. Manufactured with virgin oil and organic chemicals which react with the concrete to prevent adhesion and provide a quick and easy release. Films rapidly on all form surfaces, not slippery, prevents accumulation of dust, and cannot be removed by normal rain showers. Will not break down with steam. Water insoluble, contains no kerosene, diesel, silicone or waxes to reduce effectiveness and damage formwork. It is a thin amber liquid that remains fluid at subfreezing temperatures and can be stored indefinitely. Produces architectural concrete by eliminating bug holes caused by thick form oils. Provides a quick, easy release without staining, discoloration, or pitting. Leaves no residue or cement dust on the concrete surface when properly applied. Concrete is left with an architectural surface and ready for application of curing compounds, sealers, and coatings. When any material is to be applied on top of the concrete, follow the application instructions of the material manufacturer. Application : Specially formulated for use on aluminum and steel forms, but also effective on plywood, composite forms, plastic and urethane formliners. Ideal for architectural precast. Applicable Standards : Corps of Engineers CEGS-03300, Section 10.8 Form Coating. Navy Dock and Piers 56359. V.O.C. Compliant. Coverage : Steel, Plastic, Fiberglass: 2000 sq ft/gal Conditioned Aluminum: 2000 sq ft/gal HDO Plywood: 2000 sq ft/gal MDO Plywood: 1500 sq ft/gal Dimensional Lumber: 1000 sq ft/gal BB Grade Plywood: 1000 sq ft/gal Description : A chemical release agent for concrete forms which effectively prevents the bonding of concrete to steel, conditioned aluminum, plywood, composite forms, and formliners. MASCOKOTE GP is manufactured with organic chemicals which reacts with concrete to prevent adhesion and provide a quick, easy release. It contains no diesel, kerosene, wax or silicones. MASCOKOTE GP is a thin amber liquid that remains fluid at subfreezing temperatures. Application : Forms should be free of dirt, hardened concrete, rust, scale, and other foreign matter. Release agent is ready to use direct from container. Apply a thin film using an atomizing or misting spray tip to maximize product performance and economy. Spray uniformly with cross spray to avoid pin holes and uncoated areas. Over application will not produce better results and may cause dusting. Puddles should be wiped up with rags prior to pouring concrete. Prior to coating plywood forms, apply one or two heavy brush coats to edges for waterproofing protection. Applicable Standards : Corps of Engineers CEGS-03300, Section 10.8 Form Coating Navy Dock and Piers 56359 V.O.C. Compliant Coverage : Steel, Plastic, Fiberglass: 2000 sq ft/gal Conditioned Aluminum: 2000 sq ft/gal HDO Plywood: 2000 sq ft/gal MDO Plywood: 1500 sq ft/gal Polyurethane: 1500 sq ft/gal Dimensional Lumber: 1000 sq ft/gal BB Grade Plywood: 1000 sq ft/gal PETROLEUM BASED No. Size MS 5GMKP 5 gal. pail, 50 lbs., 24/pallet MS 55GMKGP 55 gal. drum, 550 lbs. No. Size MS 5GMKGP 5 gal. pail, 50 lbs., 24/pallet MS 55GMKGP 55 gal. drum, 550 lbs.