CASTinTACT® Concrete Tactile Warning Panels

-5- • Fast installation method for fresh concrete; typically fresh set curb ramps take 10 minutes. • CT2 tool can be used on 2′x4′, 2′x5′, 2′x6′ or wider ramps. • CT3 tool can be used on 3′x4′, 3′x6′ and 3′x8′ ramps. • Bottom shovel guides make sure proper setting depth is achieved. • Powder coated finish on INSTALaTACT ® tool for easy clean up. CASTinTACT ® 3 PANELS ARE EARLY ENTRY-FRESH SET WITH INSTALaTACT ® TOOL. Recess concrete with INSTALaTACT ® Installation Tool, insert CASTinTACT ® 3 panels and finish level with concrete surface. INSTALaTACT ® Template US Patent No. 7,000,361 & 7,121,048. INSTALaTACT ® Tool Sizes -MA CT2 (2 ′ x4 ′ Tool) -MA CT3 (3 ′ x4 ′ Tool) INSTALaTACT ® Installation Tool Supplies Needed: CASTinTACT ® 3 Panels CASTinTACT ® PreMix or Portland Cement Masons Sand Potable Water Installation Tools Needed: INSTALaTACT ® MA CT2 (2'X4' TOOL) MA CT3 (3'X4' TOOL) Level Square Point Shovel Wood Float Rubber Mallet Sprayer for Water Buckets 1/8" Radius Edger Hydra Sponge Stainless Steel Wire Brush CASTinTACT ® 3 - Installed Cross Section 600 (24") 200 (8") THICKEN SLAB UNDER TACTILE PANEL WEDGE ANCHOR DESIGN MASCO CASTinTACT 3 ® DETECTABLE WARNING PANEL 225 (9") 300 (12") 150 (6") 50 1/8" RADIUS (2") Place CASTinTACT ® 3 at the bottom of curb ramps and other blended transitions. Install across the full width of ramp a minimum 24" in depth and set back 8" from curb line.