CASTinTACT® Concrete Tactile Warning Panels

CASTinTACT ® 3 Tactile Warning Panels comply with Americans with Disabilities Act 4.29.2 standards. CASTinTACT ® 3 panels are manufactured in the United States. The CASTinTACT ® 3 Tactile Warning Panel also meet all Access Board PROWAC requirements and physical properties listed below: -3- CASTinTACT ® 3 Standard Colors Custom colors available on request Colors are approximate, samples available on request. Black Yellow Salem Red White CASTinTACT ® 3 IS OFFERED WITH A FIVE YEAR LIMITED WARRANTY AND WILL CERTIFY PANELS TO MEET OR EXCEED INTERNAL STANDARDS AS WELL AS PREVIOUSLY STATED ASTM PERFORMANCE STANDARDS. PROWAC Guidelines R304 Detectable Warning Surface Guideline Description Requirement CASTinTACT ® 3 R304.1 Dome Alignment Square Grid Pattern Yes R304.1.1 Base Dome Diameter 0.9″ min - 1.4″ max 1.0″ Top Dome Diameter 50% to 65% Base Diameter 0.60″ Dome Height 0.20″ 0.20″ R304.1.2 Dome Center to Center Spacing 1.6″ min - 2.4″ max 2.35″ Base to Base Spacing 0.65″ min 1.35″ R304.1.3 Visual Contrast Light on Dark or Dark on Light Yes Color Requirement Integral Colored Material Yes R304.1.4 Size 24″ min direction of travel Yes R301.5 Surface Firm, Stable and Slip Resistant Yes Panel Thickness 0.9” Reinforcement - Macro Structural Fiber. ASTM C 936-08 Standard Spec for Solid Concrete Interlocking Paving Units Test Method Test Description Requirement CASTinTACT ® 3 ASTM C 140 Compressive Strength/Average 8,000 psi 10,000 psi ASTM C 140 Water Absorption/Average 5% max < 5.0% ASTM C 1645 Freeze Thaw & De-Icing Salt Durability max loss 200g/m 2 , 25 cycles, 3% saline < 20g/m 2 , 25 cycles ASTM C 418 Abrasion Resistance 15cm 3 /50cm 2 max loss < 1cm 3 /50cm 2 loss ASTM C 293 Flexural Strength 1,000 psi 1,100 psi Other Test Results ASTM C 1262 Freeze Thaw Durability 1% max loss, 100 cycles, 3% ChCl < 1% loss ASTM C 672 Scaling Resistance Visual Inspection Rating 0-1, Passing ASTM C 666 Rapid Freezing and Thawing 1% max loss, 300 cycles 100%, No Loss ASTM C 779 Abrasion Resistance / Prod. A Loss in inches @ 30min/60min -0.006/30min, -0.015/60min ASTM C 482 Adhesion/Bond Strength No Adhesion Failure Passing ASTM C 1028 Wet/Dry Slip Resistance (Mod) 0.80 min wet/dry Passing ASTM C 348 Flexural Strength - 2,000 psi ASTM G 155 AcceleratedWeathering 2000 Hours ∆ E < 5 Passing CRD-C 39 Coefficient of Linear Thermal Expansion of Concrete Concrete = 8.0 x 10 -6 8.1 x 10 -6 at 95% RH Test Results CASTinTACT ®  3 Technical Specifications