OREGON
|
Clackamas Phone 503-722-1528 Fax 503-722-1569 14670 SE 82nd Dr Clackamas, OR 97015 Map |
|
Eugene Phone 541-744-6696 Fax 541-744-2302 1485 Glenwood Blvd Eugene, OR 97403 Map |
|
West Eugene Phone 541-683-1408 Fax 541-683-1956 555 Commercial St, Ste A Eugene, OR 97402 Map |
| Hillsboro Phone 503-533-0107 Fax 503-533-0407 21535 NW Cherry Ln Hillsboro, OR 97124 Map |
| Medford Phone 541-772-6161 Fax 541-772-4752 2036 Lars Way Medford, OR 97501 Map |
| Portland Phone 503-234-4321 Fax 503-234-5606 2637 SE 12th Ave Portland, OR 97202 Map |
| Salem Phone 503-585-5504 Fax 503-585-6732 2430 McGilchrist Street SE Salem, OR 97302 Map |
| Wilsonville Phone 503-582-9320 Fax 503-582-8324 10955 SW Commerce Cir, Ste E Wilsonville, OR 97070 Map |
WASHINGTON
|
Ridgefield
Forming/Shoring Facility Phone 360-887-4777 Fax 360-887-3571 7707 S. Union Ridge Pkwy. Ridgefield, WA 98642 Map |
| Seattle Phone 206-767-4645 Fax 206-767-4696 115 S. Dawson St. Seattle, WA 98108 Map |
| Tacoma Phone 253-581-6161 Fax 253-588-4272 2506 104th St Ct S, Ste B Lakewood, WA 98499 Map |
| Woodinville Phone 425-487-6161 Fax 425-402-3676 6018 234th St SE, Ste A P.O. Box 867 Woodinville, WA 98072 Map |
Please select one of our catalogs to browse:
Steel-Pro
Click here to print the Steel-Pro Specification Sheet (PDF)
Click here to print the Steel-Pro Material Safety Data Sheet (MSDS) (PDF)
DESCRIPTION
ABC Polymer Industries’ Steel-ProTM meets the requirements of ASTM A820 Type V Continuously Deformed Steel Fiber as well as meeting the requirements of ASTM C1116, Section 4.1.1.
| PHYSICAL PROPERTIES | |
| Specific Gravity: | 7.85 |
| Length: | 1.0” (25mm), 1.5” (38mm) & 2.0” (50mm) |
| Thickness: | 0.20-0.40 in (5.08-10.16mm) |
| Crimp height: | 0.06” to 0.12” (1.5 - 3.05mm) |
| Width: | 0.75” to 0.125” (1.9-3.2mm) |
| Aspect Ratios: | (1.5”) 34 and 2” (44) |
SPECIFICATION
Meets the requirements of ASTM A820 for Type V steel fiber
MATERIAL
Drawn Wire, Shaved (semi-circle cross-section), continuously deformed configuration.
PACKAGING
Standard 55lb per bag (25 kgs per bag)/40 bags per pallet unless otherwise requested by customer
WARRANTY AND LIMITATION OF LIABILITY
As used herein, the term “ABC” shall refer to ABC Polymer Industries, LLC and its subsidiaries.
The terms of ABC’s invoices shall be governed by and construed in accordance with the laws of the State of Alabama.
ABC’s fibers are intended to reduce plastic shrinkage cracking and provide secondary temperature-shrinkage reinforcement. ABC’s fibers should not be used as structural reinforcement. ABC Polymer Industries, LLC warrants that the product sold hereunder is of merchantable quality and conforms to the seller’s standards and specifications. The seller’s sole liability for claim shall be limited to replacement of defective or non-conforming product. In no event shall the seller be liable for any special, incidental, consequential, or exemplary damages. ABC Polymer Industries, LLC recommends that each user determine the suitability of the product(s) for their particular application.
ABC engineering and sales personnel are available to assist in selecting the appropriate fiber for a given specification / application. Said personnel will provide an overview of anticipated performance based upon experience and testing data. ABC personnel will provide recommendations, but are not the final arbiters on design. ABC personnel will provide onsite support where our products are utilized and when deemed necessary, but will not participate in the supervision of any project. ABC’s responsibility is to support our customers and to provide our customers with the best materials and assistance in marketing these products.