header image
HOME arrow Forming + Accessories arrow TIEING/HANDSET arrow SPREADER CLEATS
SPREADER CLEATS Print

View Catalog

 

Cleats
Spreader Cleats are used for forming foundations up to 32" high. Space cleats at 32" maximum centers for form panels up to 24" high. For form panels over 24" and up to 32" high, space cleats at 24" centers maximum. Caution must be used with 3/4" thick panels 18" or higher as extreme deflection may occur, unless snap ties are also used. The stamped metal cleat is available with 3/4" and 1-1/8" for plywood panels. 1-5/8" for dimension lumber. SWL 750 lbs.

 

 

No.

Size

Qty/Ctn 

Wt (lbs)

CT 634R 6" x 3/4" 100 35.0
CT 6118R 6" x 1-1/8" 100 38.0
CT 6158R 6" x 1-5/8" 100 42.0
CT 6414R  6" x 4-1/4" 50 35.0
CT 834R 8" x 3/4" 100 42.0 
CT 8118R 8" x 1-1/8" 100 45.0
CT 8158R 8" x 1-5/8" 100 48.0
CT 8414R 8" x 4-1/4" 50 36.0
CT 1034R 10" x 3/4" 100 50.0
CT 10118R 10" x 1-1/8" 100 52.0
CT 10158R 10" x 1-5/8"      100 56.0
CT 1234R 12" x 3/4" 100 57.0
CT 12118R 12" x 1-1/8" 100 59.0
CT 12158R 12" x 1-5/8" 50 33.0
CT 1434R 14" x 3/4" 50 32.0
CT 14118R 14" x 1-1/8" 50 34.0
CT 14158R 14" x 1-5/8" 50 36.0
CT 1634R 16" x 3/4" 50 36.0
CT 16118R 16" x 1-1/8" 50 38.0
CT 16158R 16" x 1-5/8" 50 39.0
CT 1834R 18" x 3/4" 50 40.0
CT 18118R 18" x 1-1/8" 50 42.0
CT 18158R 18" x 1-5/8" 50 44.0
CT 2434R 24" x 3/4" 50 50.0
CT 24118R 24" x 1-1/8" 50 52.0
CT 24158R 24" x 1-5/8" 50 53.0
Other Sizes Available on request.  
 

Wall
Thickness   
 

Panel
Thickness    

Pours up to
24" Height     

Pours up to
32" Height   

6"

  3/4" 1-1/8" 1-5/8" 

  32" Max Spacing 

 24" Max Spacing

8"

  3/4" 1-1/8" 1-5/8" 

  32" Max Spacing 

 24" Max Spacing

10"

  3/4" 1-1/8" 1-5/8" 

  32" Max Spacing 

 24" Max Spacing

12"

  3/4" 1-1/8" 1-5/8" 

  32" Max Spacing 

 24" Max Spacing

14"

  3/4" 1-1/8" 1-5/8" 

  32" Max Spacing 

 24" Max Spacing

16"

  3/4" 1-1/8" 1-5/8" 

  32" Max Spacing 

 24" Max Spacing
 

Note: The cleat spacings and rates of pour listed are the maximum permissible for each size cleat. Masons Supply will not be responsible or liable for form failures where the maximum cleat spacing or recommended rate of pour has been exceeded.

Spreader Cleat Diagram

RETURN TO TOP

Monostrap

For single pour, inverted foundation. Used with spreader cleats. Cleats install inside channel. Monostrap length is equal to footing width plus 3". 20 pieces per bundle.

No.

Actual Size

Footing Size

Wt (lbs)

CT 15M     

15"

12"

0.55

CT 17M

17"

14"

0.60

CT 19M

19"

16"

0.75

CT 23M

23"

20"

0.90

CT27M

27"

24"

1.00

 

Monostrap

Monostrap 

SWL provides a factor of safety of approximately 2 to 1

RETURN TO TOP


 

 

Step 1

Step 2

Step 3

Step 4 

Step 5

RETURN TO TOP


 

 

 

Latest News
Product Spotlight
Most Viewed Products
Copyright Masons Supply Company 2012. All Rights Reserved.