|
 PENCIL ROD
ROD CLAMP
TIGHTENING WRENCH
The Pencil Rod System is most commonly used in battered walls and foundations of unusual width where snapties are not practical. Pencil rod is simple and economical where surface appearance and clean breakback are not essential.
Pencil Rod
¼" pencil rod is available in coil form or bundles of 20 ft. straight lengths. If using coiled wire, must be straightened on jobsite before using.
|
No.
|
Size
|
Wt (lbs)
|
| W 14P |
Coil 100 lbs. |
0.14/lf |
| W 20PR |
20' lengths |
2.80/pc |
RETURN TO TOP
Rod Clamp
Set Screw Clamps available for ¼" diameter rods. Fabricated from ductile material suitable for use with mild steel wire rods serving as the form tie. The spreader action is by some other external means.
|
No.
|
Size
|
SWL Tension (lbs) |
Wt (lbs)
|
| DS 1RC |
1/4" |
1,125 |
0.40 |
RETURN TO TOP
Tightening Wrench
This is required to draw wire tie rod up tight and hold it in position until the set-screw in the rod clamp is tightened. A needed accessory to the rod clamp.
|
No.
|
Size
|
Wt (lbs)
|
| DS 1RODW |
1/4" rod |
1.30 |
RETURN TO TOP
|
Forming + Accessories 
