Description: A single component, moisture cure modified polyurethane waterproofing membrane. LDC 60 cures to form a seamless, elastomeric waterproof membrane that is positively bonded to the substrate. The inherent toughness and elasticity of LDC 60 enables it to bridge small structural or shrinkage cracks which may develop in the substrate. Its tenacious bond to concrete substrates prevents lateral water migration.

Application: Typically applied by roller or squeegee. Designed for below-grade vertical and horizontal surfaces, as well as, subsurface applications above grade. Typical applications is between the structural slab and wearing course on parking garages, plaza decks, balconies, roof decks, terraces, mechanical rooms, and fountains. Other applications include concrete foundation walls, parged block foundation walls, planters, tunnels, and earth-covered structures.

Coverage: Apply LDC 60 at 25 sq.ft. per gallon or as required to obtain 0.060" thickness, to the entire area to receive waterproofing, including over all detail coats. On horizontal deck surfaces, the preferred method of application is with a notched squeegee. On vertical surfaces, the preferred method of LDC 60 application is with a chemical resistant, heavy nap roller. Vertical applications typically require two passes to achieve the proper material thickness.

Specifications:
LDC60V
Color:
Black
Tack Free/Cure Time:
16 hrs/36hrs
Solids Content
(ASTM C836): 90%
Tensile Strength
(ASTM D412): 300 psi
Elongation
(ASTM D412): 650%
Adhesion to Concrete
(ASTM C794): 20 pli
Shore "A" Hardness
(ASTM D2240): 25
Shore "00" Hardness
(ASTM C836): 62-64
Water Vapor Permeance
(ASTM E96 B): .09 perms
Tear Resistance
(ASTM D624): 80 pli
Modulus at 100%
(ASTM D412): 60 psi
Water Absorption
(ASTM D471): 0.7%

VIEW TECHNICAL DATASHEET

HydroFix

Description: HydroFix is a 100% solids, solvent-free, cold fluid-applied, single-component, moisture reacted, modified elastomeric polymer that cures to form a flexible, monolithic, waterproof membrane on vertical and horizontal surfaces. HydroFix is a fast curing waterproofing membrane designed to provide a reinforced cold fluid alternative to hot applied rubberized asphalt membrane systems & pre-formed waterproofingsheeting systems. HydroFix cures through reaction with both atmospheric and substrate moisture to provide a "seamless", impervious membrane.

Application: HydroFix comes in a single viscosity for both horizontal and vertical surfaces. Typical applications are between structural slab and wearing course on parking garages, plaza decks, balconies, roof decks, terraces, mechanical equipment rooms, commercial kitchens and shower stalls. Ideally suited for waterproofing below-grade foundation walls, tunnels, planters, protected roof membrane systems, and other areas where a seamless, elastomeric waterproofing is required.

Applicable Standards: HydroFix meets the specification criteria for ASTM C836. This product contains no listed Proposition 65 listed materials.

Specifications:
Color:
Black
Setting Time at 77° F
60 mil Tack-free Set: 1 hour
60 mil Initial Through Set: 4 hours
Solids Content
(ASTM D2697): 100%
Low Temp. Flexibility
(ASTM C836): No Cracking
Low Temp. Crack Bridging
(ASTM C836): No Cracking
Hardness (Shore A)
(ASTM C661): 10 (+/-3)
Elongation
(ASTM D2370): 350%
Tensile Strength
(ASTM D2370): 95 psi
Water Vapor Transmission
(ASTM E96): 0.06 perms
Max V.O.C. Content:
< 40 grams/liter