VIEW TECHNICAL DATA SHEET

Euco Integral Waterpeller^®
 

Description: A balanced blend of stearate water repellants and other chemicals which, when used as an admixture, forms an internal barrier against water penetration. Integral Waterpeller also increases the plasticity of mortar, reduces water absorption and thereby guards against freeze-thaw damage. It is available in a white powdered form without chloride. Will not increase the air content of mortar or concrete. Reduces moisture absorption as much as 60%, reduces capillary action, vapor transmission through walls/slabs, and provides greater workability while not effecting bond strength of mortar.

Application: Primary applications are mass concrete, foundation walls, floors, cement stucco, mortar for setting masonry and glass block.

Technical Information:

Absorption Ratio:
Fed. Spec. SS-C-181b

Plain Mortar: 0.34
Mortar with "Dry" Waterpeller: 0.18

Relative Absorption:
Plain Mortar: 100%
Mortar w/ "Dry" Waterpeller: 53%

Concrete Absorption
Total Immersion:  10 min | 24 hrs

Plain Mortar:         1.28% | 4.10%
Mortar with
"Dry" Waterpeller:  0.47% | 0.65%

Dosage: 4 to 6 lb powder of integral Waterpellent will treat 1 yd³ of concrete or mortar.

- 1 lb per 94 lb bag of cement
- 1/4 lb per bag of prepared mortar

In cement-lime mortar the above quantities should be added for each 1 ft3 of lime, in addition to the quantitiy added for each bag of cement. Integral Waterpeller may be added to the mix after all other components have been added.

Note: Follow cold weather concreting practices.