|
 FELT PAPER
KRAFT PAPER
PLASTERKRAFT
SUPER JUMBO TEX 60 MINUTE 2 PLY
TYVEK
Felt Paper
A superior asphalt impregnated perforated felt breathing sheathing paper, high water resistance, vapor permeability, excellent strength, puncture resistance and flexible. An effective weather and water resistant sheathing paper applied on sidewalls behind stucco, siding, shingles or masonry veneer. Also for use under lightweight concrete floors, behind tile and in areas requiring protection against moisture dust and debris. 15# Felt Meets ASTM D-226, Type I, 30# Felt Meets ASTM D-226, Type II.
| No. |
Size |
Wt (lbs) |
| GP 15F3ASTM |
15# x 36" x 108' (3 square) |
42.0 |
| GP 30FASTM |
30# 36" x 72' (2 square) |
58.0 |
RETURN TO TOP
Kraft Paper
An ideal, asphalt laminated paper for a moisture barrier under hardwood floors. Also used as a backing for ceramic tile, and stone veneering as well as a good work over and masking paper for general utility purposes. Federal Specification: UU-B-790a, Type 1, Grade B and Style 1A and Federal Housing Specification 720-H.
| No. |
Size |
Wt (lbs) |
| GP KRP |
3' x 166' (500 sf) |
16.0 |
RETURN TO TOP
Plasterkraft
An asphalt impregnated kraft breathing sheathing paper. It is high water resistant, vapor permeability, excellent strength, puncture resistant and flexible. An effective weather and water resistant sheathing paper applied on sidewalls behind stucco, siding, shingles or masonry veneer. Meets Federal Specification UU-B--790a, Type I, Grade D, Style 2.
| No. |
Size |
Wt (lbs) |
| GP PLKR |
40" x 150' (500 sf) |
17.0 |
RETURN TO TOP
VIEW TECHNICAL DATASHEET
Super Jumbo Tex 60 Minute 2 Ply
A premier grade weather-resistive barrier designed for use within a variety of exterior wall assemblies. It provides excellent protection from internal wall damage due to water intrusion and condensation. It is an asphalt-saturated kraft Grade "D" breather-type sheathing paper. Exceeds Federal Specification UU-B-7490a, Type 1, Style 2, Grade "D". Complies with Uniform Building Code Standard 14-1. Complies as an alternative to the water-resistive barrier specified in Section 1404.2 of the 2000 International Building Code®. Complies as an alternative to the weather-resistant sheathing papers specified in Section R703.2 of the 2000 International Residential Code®. ICBO Evaluation Report No. 1025, BOCA Evaluation Report No. 2146 and SBCCI Evaluation Report No. 2103.
| No. |
Size |
Wt (lbs) |
| GP SJT2P |
40" x 162 ft2 |
21.0 |
RETURN TO TOP
VIEW TECHNICAL DATASHEET
TYVEK
A non-woven breathable material made from extremely fine, continuous high-density polyethylene fibers that are fused together by bonding. No holes are punched through TYVEK for moisture vapor breathability. That's because the fibrous structure is engineered to create extremely small pores that readily allow moisture vapor to evaporate through the sheet. These pores are so small that liquid water and air have a very difficult time penetrating TYVEK. Advantages include; Reduction of airflow through the wall; Help prevent moisture buildup in the wall cavity; Provide resistance to water penetration, and; Help protect the structure from the elements during the construction phase.
| No. |
Description |
Size |
Wt (lbs) |
| GP CW5 |
Commercial Wrap |
5' x 200' |
19.00 |
| GP CW10 |
Commercial Wrap |
10' x 125' |
24.00 |
| GP SW |
Stucco Wrap |
5' x 200' |
15.00 |
| GP TYTAPE |
Tape |
2" x 165' |
0.25 |
RETURN TO TOP
[BACK TO MASONRY]
RETURN TO TABLE OF CONTENTS
|
Forming + Accessories 
