VIEW MASONRY SECTION PDF (CATALOG PAGES 247-257)

 BLUESKIN^®
 PERMABARRIER
 DRIP EDGE FLASHING
 COP R TEX
 COPPER FABRIC
 FLASHING CEMENT
 ALUMINUM TERMINATION BAR

 VIEW PDF (CATALOG PAGE 254)

Blueskin^®
Blueskin^®, when applied appropriately, will virtually eliminate drafts and water leaks at critical areas around the exterior of your building. The membrane is made of an SBS rubberized asphalt compound that is integrally laminated to a (blue) cross laminated polyethylene film, and is specially designed to be self-adhered to all prepared substrates of concrete, CMU's, primed steel, rigid vinyl, mill finish and anodized aluminum, galvanized metal, drywall, plywood, and OSB sheathing. The SBS membrane is flexible with excellent adhesion at low temperatures. Blueskin^® is impermeable to air, moisture vapor, and water; and is self-sealing when penetrated with most fasteners. Stocked in 40 mil thickness.

RETURN TO TOP

Permabarrier
A composite, self adhesive sheet type waterproofing membrane consisting of 8 mils of high density cross laminated polyethylene bonded to 32 mils of rubberized asphalt for a total thickness of 40 mils. It is self sealing, and excellent puncture resistance. It is self healing since the adhesive system will elongate and recover if somewhat damaged. Needs no reglet when adhering membrane to vertical substrate. Applications include; thru wall flashing; concealed flashing; foundation sill flashing; base flashing; spandrel flashing; head and sill flashing and papapet flashing.

A primer is necessary for dusty and certain substrates. Consult technical bulletin for more information.

RETURN TO TOP

Drip Edge Flashing
Drip Edge Flashing, when used with thru wall flashing material creates an effective moisture barrier. The partially embedded drip edge produces an aesthetic finish. Fabricated from 26 gauge stainless steel. 10 lf lengths.

RETURN TO TOP

 VIEW PDF (CATALOG PAGE 255) 

VIEW TECHNICAL DATASHEET
Cop R Tex
The superior qualities of copper are protected during installation with sheet of heavy, creped kraft paper, asphalt bonded to one side of the copper. This is an economical product that still provides a permanent waterproofing solution. It is ideal for curtain wall and frame construction. Cop R Tex Flashing is available with 2 or 3 ounces of copper per square foot. Supplied in 60 lineal foot rolls.

RETURN TO TOP

VIEW TECHNICAL DATASHEET
Copper Fabric
Copper Fabric Flashing is permanently bonded together with a polymer modified asphalt to provide permanent protection under all thru-wall conditions. The copper sheet is asphalt coated on both sides and bonded under high pressure between two layers of high tensile fiberglass fabric. A light and flexible flashing that is rigid enough to maintain its shape when formed and installed at the job sites. Available in 3 or 5 ounces of copper per square foot. Copper Fabric Flashing is supplied in 25 lineal foot rolls.

RETURN TO TOP

Flashing Cement
An asphalt modified cement for bonding copper flashing to itself and to modified bituminous membranes. A custom blend of rubber, refined asphalt, solvents and thixotropic additives, augmented with reinforcing fibers. Apply cold by trowel. Cures to a tough, flexible waterproof barrier and adhesive for long term performance. Resistant to ultra violet and chemical attack. It is a non-asbestos formula. Meets ASTM D-4586-86, Type 1.

RETURN TO TOP