header image
HOME arrow Forming + Accessories arrow SLAB/HORIZONTAL arrow EXPANSION JOINT
EXPANSION JOINT Print


View Catalog



  FIBER
  FULL SHEETS
  CURB CUTS
  REMOVABLE JOINT CAP
  BENDERBOARD
  FLEXIBLE FOAM
  FOAM JOINT FILLER
  PETROCAP
  REFLEX®
  CORK
  SELF EXPANDING CORK
  SPONGE RUBBER
  VERTICAL JOINTS
  BACKERSEAL(GREYFLEX)
  
SEISMIC COLORSEAL
  
HORIZONTAL JOINTS
  20H SYSTEM
  
DSH SYSTEM


  
Fiber

A preformed, non-extruding resilient filler, saturated with high quality bituminous materials having preserving characteristics. The material is strong, but lightweight, cuts and handles easily, resists breakage. It will not extrude from the joint under normal compression and service temperatures and does not become brittle in cold weather. Useful in all types of concrete construction in both interior and exterior applications. 100 lf per bundle.

Conforms to:

ASTM D 1751 HHF- 341 F Type 1

AASHTO M 213 CRD C 508

FAA P-610-2.7

Cut Sizes

No. Size Wt/Clf (lbs) 
EX 382 3/8" x 2" x 10'  13.0 
EX 122 1/2" x 2" x 10'   15.0
EX 383 3/8" x 3" x 10'   19.0
EX 123  1/2" x 3-1/2 x 10'   22.0
EX 38312 3/8" x 3-1/2" x 10"   22.0
EX 12312 1/2" x 3-1/2" x 10"  25.0
EX 384 3/8" x 4" x 10'  25.5
EX 124 1/2" x 4" x 10'   30.0
EX 38512 3/8" x 5-1/2" x 10'  38.0
EX 12512 1/2" x 5-1/2" x 10"  44.0
EX 386  3/8" x 6" x 10'  38.0
EX 126 1/2" x 6" x 10'   44.0
Other sizes available upon request. 

RETURN TO TOP



Full Sheets

No. Size Wt(lbs)       Qty/Plt 
EX 144'10      1/4" x 4' x 10'    25.0 120
EX 384'10 3/8" x 4' x 10' 38.0 100
EX 124'10 1/2" x 4' x 10' 50.0 80 
EX 344'10 3/4" x 4' x 10' 75.0 50
EX 14'10 1" x 4' x 10' 100.0 40
 
RETURN TO TOP


 


Curb Cuts
Curb and Gutter Sections are fabricated on special order. The two general types are shown here and supplied in fiber joint from sheet stock in 1/2" thickness.

No. Size Wt(lbs)      
EX CC     6" x 9" x 16"    1.0
EX CG 6" x 12" x 24"     1.65
 

 Curb Cuts

RETURN TO TOP



Removable Joint Cap
Eliminates joint cleanup, saving hours of labor. Eliminates the need for joint backer rod and most of the handwork normally spent forming expansion joints to be caulked and sealed in concrete slabs or any horizontal or vertical masonry. Manufactured with strong, high impact polystyrene (HIPS). The strip slides over the top of the expansion board just prior to concrete placement. The lower section of the cap is keyed in the concrete and the top section strips to create a reservoir for sealants. Easily cut with a hand or power saw. Easily stripped by inserting a screwdriver and pulling up. Provides sharp, clean professional grooving available in several sizes to accommodate most applications. 500 lf per carton.

No. Size Wt(lbs)      
EX JC38    3/8" x 1/2"    0.42
EX JC12 1/2" x 1/2" 0.44
EX JC34 3/4" x 1/2"  0.65
EX JC1  1" x 1/2"  0.84
  

Removeable Joint Cap

RETURN TO TOP



   

Benderboard
Easily shapes decorative and curved walkways, patios, pools, and spas. Leaves a clean, smooth surface without pretreating. Reusable and has no product shrink during shipping, handling, or use, resulting in long-term cost savings. Easy to cut and form using standard wood working tools. 5/16" thickness bends into tight 1' radius curves or 2' diameter circles without cracking, splitting, or breaking. Flexible in any temperature and will not absorb moisture.

No. Size Pcs/Bndl  Wt(lbs)      
CT BB1 5/16" x 3-7/16" x 16'   10  0.54
CT BB2 5/8" x 3-7/16" x 16'  5 1.08
CT BB4 5/16" x 5-3/8" x 16'  5 0.833
 

Benderboard

RETURN TO TOP



Flexible Foam
Flexible Foam Expansion Joint Filler is composed of a unique synthetic foam of isomeric polymers in a very small, closed-cell structure. Gray in color, lightweight, flexible, highly resilient material offering recovery qualities of over 99%. The compact, closed-cell structure will absorb almost no water. Flexible Foam Expansion Joint Filler provides an excellent joint filler and back-up material for use in either horizontal or vertical applications where expansion and contraction movements must be accommodated. It is compatible with all currently popular cold-applied sealants,and hot-pour joint sealing compounds. It is lightweight and easy to cut or form in the field without waste.

No. Size Wt(lbs)      
WR 124' 10C 1/2" x 4' x 10' 2.4
Other sizes available upon request.
  

Flexible Foam 

Conforms To:

ASTM D5249 TYPE II, ASTM D1752 Section 5.1 through 5.4 with the compression requirement modified to 10psi minimum and 25 psi maximum.

RETURN TO TOP



Foam Joint Filler
Foam Expansion Joint Filler is a tough, flexible, lightweight filler with a long life expectancy. It is designed to replace brittle asphalt impregnated fillers. It provides a convenient removable portion that ensures a uniform sealable void in the joint. Prior to sealing or caulking, the removable strip can be easily extracted leaving a trim clean joint. Can be used in pool decks, bridge construction, concrete gutters, suspended walkways, concrete forms, etc.

No. Size Wt(lbs)      
WR 12350DF 1/2" x 3" x 50' 1.40
WR 12450DF 1/2" x 4" x 50' 1.50
  

Foam Joint Killer

RETURN TO TOP



PetroCap
PetroCap is a chemical resistant joint seal for use in the secondary containment of hazardous fluids. Large concrete slabs and structures are subject to leakage at the construction joints where joining sealants have been proven ineffective. PetroCap is easily installed by stapling under the ribbed flange to the header board. The header board, with the installed PetroCap, then becomes an integral part of the concrete structure. This is much easier than the installation of joint sealants. Joints sealants require cleaning and tooling of the joint, priming the concrete sides of the joint, and installing mixed liquids at the correct temperature in a moisture-free environment.

No. Size Lf/Ctn     Wt(lbs)      
EX PC12     1/2" x 10'     30 20.0
EX PC32 3/4" x 10' 30 22.0
 

PetroCap 

RETURN TO TOP


 


Reflex®
Reflex® Rubber Joint Expansion Joint material for concrete is a processed board product formed by blending granular rubber derived from discarded tires and various low density polymer components. Premolded under heat and pressure, it is more durable than current alternatives. Suitable for use as expansion or control joint in a wide variety of concrete construction projects such as roadways, airport runways, sidewalks, driveways, flooring, parking lots, patios and curbs.

No. Size Lf/Bndl     Wt/Bndl(lbs)      
EX 123R 1/2" x 3" 64 28.0
EX 12312R 1/2" x 3-1/2" 56 28.0
EX 124R 1/2" x 4" 48 28.0
EX 126R 1/2" x 6" 32 28.0
EX 142R 1/4" x 2" 288 41.0
 

Conforms to:
ASTM D-1751-97 and ASTM D-1752-84
AASHTO M-153-98 and AASHTO M-213-95
HH-F-341F TYPE I

 

RETURN TO TOP



Cork
Preformed from selected cork particles and bonded together with an insoluble resin. This joint filler is resistant to acids and alkalies, is flexible, waterproof and light in color. It will not extrude when compressed to 50% of its original thickness and will recover to approximately 95% when released. Cork expansion joint is compatible with elastomeric, chemically cured sealant. Applications include water and sewage treatment plants, flood walls, outlet works, spillways and industrial construction. Weight at 1/2" thickness is .75 lbs per sf.

Cork

Conforms to:
ASTM D 1752, Type II CRD C509, Type ll
HHF 341F, Type II, Class B FAA P610-2.7
AASHTO M 153 Type II

 

RETURN TO TOP



Self Expanding Cork
Molded of selected cork granules and resin binders then specifically treated to permit expansion of as much as 50% of original thickness. The material is non-extruding and used where excessive contraction is anticipated. Because of its mechanical sealing properties, it is particularly suited for joints in liquid-containing structures, (in conjunction with waterstops and/or sealants) or for preventing intrusion of foreign matter into overly contracted joints. Elastomeric, chemically-cured sealants are recommended for use with this product. Weight at 1/2" thickness is 1.2 lbs per sf.

Self Expanding Cork

Conforms to:
ASTM D 1752 Type III AASHTO M 153 Type III HHF 341F Type II, Class C CRD C 509 Type III FAA P610-2.7

RETURN TO TOP



Sponge Rubber
Neoprene sponge rubber is resilient and compressible. It will compress without extruding and recover to 90% of its original thickness. It is compatible with all chemically-cured elastomeric sealants and can be used as an alternate to cork (meets all test requirements). Ideal for use in water and sewage treatment plants, flood walls, outlet works, spillways, bridges, commercial and industrial construction. Weight at 1/2" thickness is 1.36 lbs per sf.

Sponge Rubber 

Conforms to:
FAA P610-2.7 ASTM D 1752 Type 1
HHF 341F Type II,Class A CRD-C 509 Type 1
AASHTO M 153 Type 1

RETURN TO TOP



   

VERTICAL JOINTS
 

VIEW PRODUCT DATASHEET
Backerseal (Greyflex)

Uses: Walls, Doors, Windows, Panels, Control Joints, etc.

An economical, high performance expanding foam secondary sealant to field-applied liquid sealant. It is ideally suited to EIFS, as well as concrete, brick, stone etc. Consists of acrylic-impregnated open-cell foam material combined with laminations of closed-cell EVA foam in sizes over ⅜". Non-staining and compatible with a wide range of liquid sealants. Puncture or failure of primary liquid sealant does not affect sealant system performance. It is supplied pre-compressed to smaller than joint size with a mounting adhesive on one face. Material is inserted into joint and adhered to one side. It then expands to seal the joint. Sealing between the foam and substrate is achieved through a combination of the pressure-sensitive adhesive impregnation and the back pressure of the expanding foam. R-value of 3.28/inch of depth adds thermal insulation to joint gaps. Standard sizes from ⅛
" to 10". Movement capability is +25% (50% total) of nominal material size.

Backerseal

 

RETURN TO TOP



VIEW PRODUCT DATASHEET
Seismic Colorseal


Uses: High-movement Curtainwall, New-To-Existing, Skywalks, Seismic, Masonry, Metal Panels, etc.


Ideally suited to EIFS, curtainwall and metal cladding systems, as well as concrete, brick and stone. It combines factory-applied and cured silicone facing with permanently elastic acrylic-impregnated open-cell foam sealant backing. Back pressure maintains seal and ensures that silicone is virtually never under tension. Supplied in shrink wrapped lengths (sticks). Pre-compressed to smaller than joint size with a mounting adhesive on one face, material is inserted into joint and adhered to one side. It then expands to seal the joint. Addition in the field of a silicone corner bead ensures sealing between the silicone facing and substrate. Non-invasive anchoring, eliminates drilling into substrates typical of strip-seal systems. Easily installed into inside-corner conditions impossible to seal with rubber-and-rail type strip-seal systems. R-value of 3.28/inch of depth adds thermal insulation to joint gaps. Standard sizes from
⅜" to 10". Sizes up to ¾" have single convex facing. Movement capability is +50%, -50% (100% total) of nominal material size. Available in 11 standard colors. Precast White, Natural Stone, Gray, Black, Bronze, Sandstone Adobe Tan, Dusty Rose, Rustic Brick, Blue Spruce, Charcoal.
20H System
Uses: Intermediate level decks, joints, perimeter joints, sidewalks, aprons, joints at utility rooms, parapets, below-grade foundation wall joints, icefloors, etc.

Seismic Colorseal

RETURN TO TOP



 
HORIZONTAL JOINTS
  

VIEW PRODUCT DATASHEET
20H System

Uses: Intermediate level decks, joints, perimeter joints, sidewalks, aprons, joints at utility rooms, parapets, below-grade foundation wall joints, icefloors, etc.

The 20H System is an economical, resilient, and traffic-durable seal. It consists of 20H foam, epoxy adhesive& topcoat. Permanently elastic, high density, open-cell polyurethane foam, impregnated with water-based, polymer-modified asphalt, compressed to approximately 20% of its uncompressed dimension. Supplied pre-compressed to smaller than mean joint size, installed flush with or near to surface into wet epoxy adhesive, the material expands to seal the joint. Exposed top surface is treated with Topcoat flexible coating to enhace sealing and durability. Movement capability is +25%, -25% (50% total) nominal material size. Standard sizes from 1/2" to 4".

20H System

RETURN TO TOP



VIEW PRODUCT DATASHEET
DSH System


Uses: Traffic-durable seal for a variety of deck and slab applications.


Permanently elastic, high density, open-cell polyurethane foam, impregnated with water-based, polymer-modified asphalt, compressed to approximately 20% of its uncompressed dimension. The high-density foam backing is coated with a factory-applied, controlled, and cured coating of traffic-grade silicone. The silicone provides weathering, waterproofing, and fuel resistance as well as aesthetic and movement advantages over the precursor, 20H. System consists of DSH foam, epoxy adhesive and liquid silicone for corner beads. Supplied pre-compressed to smaller than mean joint size; installed near to surface into wet epoxy adhesive. Standard sizes from 1/2" to 6". Movement capability is +25%, -25% (50% total) nominal meterial size.

DSH System

RETURN TO TOP


[BACK TO SLAB/HORIZONTAL]

RETURN TO TABLE OF CONTENTS

Latest News
Product Spotlight
Most Viewed Products
Copyright Masons Supply Company 2012. All Rights Reserved.