header image
HOME arrow Forming + Accessories arrow SLAB/HORIZONTAL arrow CURB & EDGE FORMS
CURB & EDGE FORMS Print


View Catalog

 

  CURB FORMS
  STRAIGHT FORMS
  FLEXIBLE FORMS
  SPECIAL FORMS
 CURB & GUTTER SPECIFICATIONS



Curb Forms
The Curb Forming System is a versatile product line that adapts to many different concrete forming conditions. It is ideally suited for applications that include sidewalks, driveways, curb and gutters, pavements, footing and industrial slabs.

This forming system features durable steel components, with added reinforcement, for maximum service life. These components are precision welded to provide a system that lasts far longer than conventional lumber edge forms.

The productivity advantages of this forming system are obvious. The system adapts to different project conditions, reducing applied forming costs. A crew sets the system quickly and consistently, reducing related labor costs. The steel design eliminates lumber replacement costs, maximizing system reuse.

Curb Forms

Full Plate | Skeleton Plate

RETURN TO TOP





Straight Forms
The Straight Form is available in 10' lengths, with heights ranging from 4", 6" and 12", to satisfy almost any straight edge forming condition. Each form has reinforced stake pockets on the back side that secure ¾" steel stakes and support the form during concrete placement. The rounded nose and connection of one form quickly connects into the box of another form for accurate alignment.

Straight Forms are most often used as edge forms for concrete slabs. The bottom edge of the form rests on the subgrade or the stake pocket holds the form at the proper elevation. The top edge of the form provides a place for lightweight screed equipment used during concrete placement. Forms can even be stacked for thick concrete slabs.

Straight Forms are also used to form a variety of curb and gutter configurations. Curb dimensions establish the shape of the Division Plates needed. The Plates are then positioned over the Straight Forms to support the Curb Face Form. The final concrete finish is applied after the Curb Face Form and Division Plates are removed (before final set).

Straightforms

Inside & Outside Corner Forms

RETURN TO TOP 




Flexible Forms
The Flexible Form is available in 10' lengths with heights ranging from 4", 6" and 12", to satisfy almost any radius edge forming condition. Each form has seven reinforced stakes pockets on the back side that secure ¾" steel stakes and support the form during concrete placement. A simple end connection only requires a keybolt and wedge (or a nut and bolt) to secure one form to another.

Flexible Forms complement Straight Forms when concrete must be placed in radius or curved applications. Transition Forms can be used to join the equipment and maximize forming system productivity.


Special Forms
Other special forms are available to maximize productivity for unique forming conditions. Filler Forms are used to overlap Straight Forms and close edge openings up to 5'. Corner Forms are used with Straight Forms for precise dimension corner forming. Batter Plates are used with Straight Forms to create a partial or full batter curb design.

No. Description    Wt (lbs) 
DEE 410CSF   4" x 10' straight form, 3 pocket   39.00
DEE 610CSF 6" x 10' straight form, 3 pocket 47.00
DEE 1210CSF 12" x 10' straight form, 3 pocket 95.00
DEE 610CFF 6" x 10' J curb face form,
1" batter, 1" bottom radius
40.00 
DEE 512TS 5-1/2" top spreader 2.00 
DEE 1218FDP 12" high x 18" wide division plate,
1" batter, 1" bottom radius 
6.00 
DEE 1218SDP 12" high x 18" wide skeleton division plate,
1" batter
2.40 
DEE 1224FDP  12" high x 24" wide skeleton division plate,
1" batter
8.00
DEE 1224SDP 12" high x 24" wide skeleton division plate,
1" batter, 1" bottom radius
3.20 
Other Sizes Available. 
  

Flexible Forms

Paving Form

Super Flat Form

RETURN TO TOP




Curb and Gutter Specifications

Battered Face

High Curbs 

 



COPY AND COMPLETE ALL CURB AND GUTTER DIMENSIONS

 

FAX BACK TO NEAREST MASONS LOCATION.

 

Top Curb Width - Dimension A - inches __________

 

Back Form - Dimension B - inches __________

 

Curb Height - Dimension C - inches __________

 

Gutter Form - Dimension D - inches __________

 

Flat Area - Dimension E - inches __________

 

Raised Area - Dimension F - inches __________

 

Gutter Rise - Dimension G - inches __________

 

Flat Bottom No Rise - Dimension H - inches __________

 

Batter - Dimension I - inches __________

 

Radius - Dimension R - inches __________
 

RETURN TO TOP


[BACK TO SLAB/HORIZONTAL]

RETURN TO TABLE OF CONTENTS

Latest News
Product Spotlight
Most Viewed Products
Copyright Masons Supply Company 2012. All Rights Reserved.